Programmable brushless controller for airplane models. Continuous current 80A (peak current 100A), power supply 3-6 cell Lipopack, receiver power supply BEC 5V/7A, weight 82g, dimensions 86x38x12mm.
Programmable microprocessor controller for brushless sensorless motors, designed using modern semiconductor technology. It offers easier and clearer programming with the transmitter and really simple and lightning-fast setup using the KAVAN R LED programming card (sold separately). It is used to control the speed of the brushless electric motors in recreational aircraft models powered by NiCd/NiMH and LiPo/Li-ion batteries. It is equipped with the linear BEC system, which ensures the power supply of the receiver and the servos from the drive battery.
DESCRIPTION AND FUNCTIONS OF THE REGULATOR
Extremely low internal resistance thanks to the new generation of powerful MOSFET transistors
Suitable for most brushless aircraft motors powered by 3-6S LiPo/Li-ion batteries
For power supply from rechargeable batteries NiCd, NiMH, LiPo, Li-ion
Linear stabilizer BEC 5.0 V with a load of up to 7 A
Adjustable timing for optimal adaptation to the engine
Adjustable undervoltage protection - shuts off the engine in the event of undervoltage
Safe switch-on (prevents motor from starting when switched on)
Temperature overload protection against overload (when the temperature reaches 110 degrees, the controller reduces power)
Automatic engine shutdown if the transmitter signal is lost
Linear regulation of the gas
Easy programming and setting using the transmitter or the LED programming card KAVAN R
Calibration of the throttle path for the perfect adjustment to the transmitter signal of your RC set
PROGRAMMABLE FUNCTIONS
Brake (Off - On)
Selectable battery type (Li-poly or NiCd/NiMH)
Engine shutdown type: engine power reduction or engine shutdown
Adjustable undervoltage for engine shutdown - Undervoltage protection against excessive battery discharge. (Lithium batteries: 2.85 V/cell, 3.15 V/cell, 3.3 V/cell; NiXX battery: 0%/50%/65% from the initial value of the voltage)
Resetting the controller to factory settings
Adjustable timing - for increasing the effectiveness and optimal adjustment of the motor - low (3.75 degrees), medium (15 degrees), high (26.25 degrees)
Adjustable soft start for motors with gears and helicopters in three stages: normal (300 ms) / soft (1.5 s) / super soft (3 s)
PROTECTIVE FUNCTIONS OF THE REGULATOR
Start-up Protection: If the engine does not start within 2 seconds of accelerating, the ESC will stop the engine.
Thermal protection: If the temperature of the controller exceeds 110 degrees, the controller will limit the output power.
Loss of throttle signal: The controller will limit the power if the signal is missing for 1 second; if there is no signal for more than 2 seconds, the engine is switched off.
Tip: When switching on the controller for the first time, first carry out the calibration of the gas path according to the instructions. Only then is it possible to use the controller and set other parameters with the help of the transmitter or the KAVAN R LED programming card.
Usage: Airplane, Helicopter ; Type: Brushless ; Continuous current [A]: 80 ; Max. peak current [A]: 100 ; LiXX cells: 3 - 6 ; BEC voltage [V]: 5 ; BEC current [A]: 7 ; Length [mm]: 86 ; Width [mm]: 38 ; Height [mm]: 12 ; Weight [g]: 82 ;
Use airplane,helicopter
Type AC
Continuous current [A] 80
Max. peak current [A] 100
LiXX cells 3 - 6
BEC voltage [V] 5
BEC current [A] 7
Length [mm] 86
Width [mm] 38
Height [mm] 12
Weight [g] 82
Control unidirectional
brake yes
Sensor input no
Programmable yes