Brushless outrunner electric motor for airplane models: glider 1700g, trainer 1600g, aerobatic model 1330g, 3D 1050g, KV1000 rpm/V, supply Lixx 3-4s. Shaft 5.0mm. Alternative designation due to the stator dimensions: 2814-1000.
KAVAN PRO series motors are powerful 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high-quality ball bearings, high-quality material for stators and rotors ensure a long service life and unbeatable performance and high efficiency. The KAVAN PRO series motors are comparatively low speed, high torque electric motors capable of utilizing large diameter propellers without the need for a gearbox.

Engine designation system: PRO xxYY-zzzz
PRO - Brushless outrunner electric motor
xx - motor diameter in mm
YY - motor length in mm
zzzz - revolutions per minute per volt (RPM/V), "KV"

CAVAN FOR 3536-1000

KAVAN PRO 3536-1000 is a motor for model airplanes up to 1800 g total weight, which is powered by a 3-4S LiPo battery. It is ideal for 2000-2300 mm electrically powered thermal gliders such as MULTIPLEX ® FunCub, Solius, Heron as well as for 1200-1400 mm high-wing trainers, scale and aerobatic models.

Motor installation: KAVAN 3536-1000 was developed for both front and radial installation. Front mounting: use four M3 screws; these must not dip deeper than 3-4 mm into the front housing. Radial Mounting: Use four M3 screws to attach the mounting cross to the motor bulkhead. The motor bulkhead should be 4.0mm plywood. The radial mounting kit is supplied with the motor.

Motor kit contents: KAVAN PRO 3536-1150 motor w/cable (gold plated 3.5mm connectors), radial mounting kit. A full user manual can be downloaded here: KAVAN PRO Brushless Motors - User Manual

Note: Alternative designation due to the stator dimensions: 2814-1000.

Power supply of LiXX cells 3 - 4
Speed per volt [ot./min/V] 1000
Max power (180s) [W] 700
Internal resistance [mOhm] 35
No-load current (at 10 V) [A] 1.5
Max. peak current (180 s) [A] 50
Diameter [mm] 35.2
Length [mm] 34
Total length [mm] 54.5
Shaft diameter [mm] 5
Weight [g] 107
Number of poles 14
Time [°] 20 - 25
Rules [A] 50 - 60
Glider up to weight [g] 1700
Trainer up to weight [g] 1600
Aerobatic model up to weight [g] 1300
3D model up to weight [g] 1050
 
Recommended propeller 3S: 12x6"
4S: 10x5"