Brushless outrunner electric motor for airplane models: glider 1200g, trainer 1000g, aerobatic model 850g, 3D 750g, KV1200 rpm/V, supply Lixx 3-4s. Shaft 5.0mm. Alternative designation due to the stator dimensions: 2808-1200.
KAVAN PRO series motors are powerful 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high-quality ball bearings, high-quality material for stators and rotors ensure a long service life and unbeatable performance and high efficiency. The KAVAN PRO series motors are comparatively low speed, high torque electric motors capable of utilizing large diameter propellers without the need for a gearbox.

Engine designation system: PRO xxYY-zzzz
PRO - Brushless outrunner electric motor
xx - motor diameter in mm
YY - motor length in mm
zzzz - revolutions per minute per volt (RPM/V), "KV"

CAVAN FOR 3530-1200

KAVAN PRO 3530-1200 is a motor for model airplanes up to 1200 g total weight, which is powered by a 3-4S LiPo battery. It is ideal for electric gliders such as the MULTIPLEX ® Easy Glider, Gemini or similar.

Motor installation: KAVAN 3530-1200 is designed for both front and radial mounting. Front mounting: use four M3 screws; these must not dip deeper than 3-4 mm into the front housing. Radial Mounting: Use four M3 screws to attach the mounting cross to the motor bulkhead. The motor bulkhead should be 3.0mm plywood. The radial mounting kit is supplied with the motor.

Motor kit contents: KAVAN PRO 3530-1200 motor w/cable (3.5mm gold plated connectors), radial mounting kit. A full user manual can be downloaded here: KAVAN PRO Brushless Motors - User Manual

Note: Alternative designation due to the stator dimensions: 2808-1200.

Power supply of LiXX cells 3 - 4
Speed per volt [ot./min/V] 1200
Max power (180s) [W] 300
Internal resistance [mOhm] 46.5
No-load current (at 10 V) [A] 1.24
Max. peak current (180 s) [A] 25
Diameter [mm] 35.2
Length [mm] 28
Total length [mm] 48.5
Shaft diameter [mm] 5
Weight [g] 81
Number of poles 14
Time [°] 20 - 25
Rules [A] 30 - 40
Gliders up to weight [g] 1200
Trainer up to weight [g] 1000
Aerobatic model up to weight [g] 850
3D model up to weight [g] 750
 
Recommended propeller 3S: 10x5"
4S: 8x4"-8x5"