Brushless outrunner electric motor for airplane models: glider 450g, trainer 450g, aerobatic model 400g, 3D 330g, KV1000 rpm/V, supply Lixx 2-4s. Shaft 4.0mm. Alternative designation due to the stator dimensions: 2208-1000.
KAVAN PRO series motors are powerful 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high-quality ball bearings, high-quality material for stators and rotors ensure a long service life and unbeatable performance and high efficiency. The KAVAN PRO series motors are comparatively low speed, high torque electric motors capable of utilizing large diameter propellers without the need for a gearbox.

Engine designation system: PRO xxYY-zzzz
PRO - Brushless outrunner electric motor
xx - motor diameter in mm
YY - motor length in mm
zzzz - revolutions per minute per volt (RPM/V), "KV"

CAVAN FOR 2826-1000

KAVAN PRO 2826-1000 is a miniature motor for light model airplanes up to 450 g total weight, powered by a 2-4S LiPo battery. It could be used to 'electrify' rubber powered flight models from Guillows or Dumas kits (up to 1200mm wingspan), it is also excellent for indoor models and park flyers.

Motor installation: KAVAN 2826-1000 was developed for both front and radial installation. Front mounting: use at least two (opposite) or better four M3 screws; these must not dip deeper than 3-4 mm into the front housing. Radial Mounting: Use four M3 screws to attach the mounting cross to the motor bulkhead. The motor bulkhead should be 2.0mm plywood. The radial mounting kit is supplied with the motor.

Motor kit contents: KAVAN PRO 2826-1000 motor w/cable (gold plated 3.5mm connectors), radial mounting kit accessories. A full user manual can be downloaded here: KAVAN PRO Brushless Motors - User Manual

Note: Alternative designation due to the stator dimensions: 2208-1000.

Power supply of LiXX cells 2 - 4
Speed per volt [ot./min/V] 1000
Max power (180s) [W] 200
Internal resistance [mOhm] 163
No-load current (at 10 V) [mA] 550
Max. peak current (180 s) [A] 14
Diameter [mm] 28.8
Length [mm] 24
Total length [mm] 40.5
Shaft diameter [mm] 4
Weight [g] 50
Number of poles 14
Time [°] 20 - 25
Rules [A] 15 - 20
Glider up to weight [g] 450
Trainer up to weight [g] 450
Aerobatic model up to weight [g] 400
3D model up to weight [g] 330
 
Recommended propeller 3S: 9x6"
4S: 8x6"