Brushless outrunner electric motor for airplane models: glider 300g, trainer 280g, aerobatic model 250g, 3D 200g, KV1500 rpm/V, supply Lixx 2-3s. Shaft 4.0mm/rubber driver 5.5mm. Alternative designation due to the stator dimensions: 2206-1500.
KAVAN PRO series motors are powerful 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high-quality ball bearings, high-quality material for stators and rotors ensure a long service life and unbeatable performance and high efficiency. The KAVAN PRO series motors are comparatively low speed, high torque electric motors capable of utilizing large diameter propellers without the need for a gearbox.

Engine designation system: PRO xxYY-zzzz
PRO - Brushless outrunner electric motor
xx - motor diameter in mm
YY - motor length in mm
zzzz - revolutions per minute per volt (RPM/V), "KV"

COFFEE FOR 2813-1500

KAVAN PRO 2813-1500 is a miniature motor for small model airplanes with a total weight of up to 300 g, powered by a 2-3S LiPo battery. It can be used to 'electrify' rubber motor powered flight models from Guillows or Dumas kits (up to 1200mm wingspan), it is also excellent for indoor models and park flyers

Motor Installation: KAVAN 2813-1500 is designed for radial mounting with 5.5mm prop saver. Use at least two (opposite) or four M2 screws; The motor bulkhead should be made of 1.0-1.5mm plywood. The cross mount is an integral part of the engine.

Contents of the engine set: KAVAN PRO 2813-1500 engine with cables (no plugs), prop saver set. A full user manual can be downloaded here: KAVAN PRO Brushless Motors - User Manual

Note: Alternative designation due to the stator dimensions: 2206-1500.

Power supply of LiXX cells 2 - 3
Speed per volt [ot./min/V] 1500
Max power (180s) [W] 170
Internal resistance [mOhm] 96.5
No-load current (at 10 V) [mA] 700
Max. peak current (180 s) [A] 15
Diameter [mm] 28
Length [mm] 13.3
Total length [mm] 19.3
Shaft diameter [mm] 4
Weight [g] 27.6
Number of poles 14
Time [°] 20 - 25
Rules [A] 15 - 20
Gliders up to weight [g] 300
Trainer up to weight [g] 280
Aerobatic model up to weight [g] 250
3D model up to weight [g] 200
 
Recommended propeller 2S: 9x5"-10x6"
3S: 8x4"