Brushless outrunner electric motor for airplane models: glider 250g, trainer 220g, aerobatic model 180g, 3D 130g, KV1620 rpm/V, supply Lixx 2-3s. Shaft 3.0mm/rubber driver 5.5mm. Alternative designation due to the stator dimensions: 2202-1620.
KAVAN PRO series motors are powerful 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high-quality ball bearings, high-quality material for stators and rotors ensure a long service life and unbeatable performance and high efficiency. The KAVAN PRO series motors are comparatively low speed, high torque electric motors capable of utilizing large diameter propellers without the need for a gearbox.

Engine designation system: PRO xxYY-zzzz
PRO - Brushless outrunner electric motor
xx - motor diameter in mm
YY - motor length in mm
zzzz - revolutions per minute per volt (RPM/V), "KV"

CAFÉ FOR 2809-1620

KAVAN PRO 2809-1620 is a miniature motor for smaller model airplanes with a total weight of up to 220 g, which is powered by a 2-3S LiPo battery. It can be used to 'electrify' rubber motor powered flight models from Guillows or Dumas kits (up to 1000mm wingspan), it is also excellent for indoor models and park flyers.

Motor Installation: KAVAN 2809-1620 is designed for radial mounting with 5.5mm prop saver. Use at least two (opposite) or four M2 screws; The motor bulkhead should be made of 1.0-1.5mm plywood. The cross mount is an integral part of the engine.

Contents of the motor set: KAVAN PRO 2809-1620 motor with cables (no plugs), prop saver set. A full user manual can be downloaded here: KAVAN PRO Brushless Motors - User Manual

Note: Alternative designation due to the stator dimensions: 2202-1620.

Power supply of LiXX cells 2 - 3
Speed per volt [ot./min/V] 1620
Max power (180s) [W] 54
Internal resistance [mOhm] 387
No-load current (at 10 V) [mA] 280
Max. peak current (180 s) [A] 9
Diameter [mm] 28
Length [mm] 8.9
Total length [mm] 18.4
Shaft diameter [mm] 3
Weight [g] 15
Number of poles 14
Time [°] 20 - 25
Rules [A] 15 - 20
Gliders up to weight [g] 250
Trainer up to weight [g] 220
Aerobatic model up to weight [g] 180
3D model up to weight [g] 130
 
Recommended propeller 2S: 9x5"-10x6"
3S: 8x4"