Brushless electric motor with external rotor bell (outrunner) for airplane models: glider 2700g, trainer 2600g, acro 2300g, 3D 1500g, KV800 revolutions/minute per volt, power supply Lixx 3-5s, shaft 4.0mm.
The KAVAN C motors are powerful 14-pole brushless electric motors with an external rotor bell ("Outrunner"). They have excellent electrical properties, elaborate construction and perfect production processing. They are a very good choice as drives for your recreational and sports models with excellent performance and affordable price. These are low-rpm, high-torque engines that spin large-diameter propellers without a gearbox.

Engine designation system: CxxYY-zzzz
C - Brushless motor with outrunner bell ("Outrunner")
xx - diameter of the motor in mm
YY - length of the motor in mm
zzzz - speed/volt (RPM/V), "KV"

KAVAN C3548-800 is a brushless motor for models with a flying weight of up to 2700 g, powered by a 3 to 5 cell Li-Po battery. This engine is suitable for models such as EPP "Warbirds" and Akro models with a wingspan of 1300-1400 mm, Spitfire EP or Mustang EP from Phoenix and similar.

Motor mounting: KAVAN C3548-800 is designed for mounting on both sides. When installing the front behind the motor bulkhead, use four M3 screws, which are located on the motor bulkhead at a distance of 4-5 mm. The holes for the fastening screws on the front panel are distributed in 180 degrees at equal distances to the circular line with a diameter of 25 and 19 mm. The motor bulkhead should be 5mm plywood. We supply the stern mounting set (mounting cross and propeller driver) together with the engine.

The motor set includes: the motor C3548-800 with cables and the 3.5 mm gold-plated jack plugs, the set for the rear assembly, instructions.

Power supply LiXX cells: 3 - 5 ; Revolutions per volt [rpm/volt]: 800 ; Max. power (30 s/5S LiPo) [W]: 660 ; No-load current (3S) [A]: 2.2 ; Max. peak current (30 s) [A]: 48 ; Diameter [mm]: 35 ; Length [mm]: 48 ; Shaft diameter [mm]: 4 ; G

Power supply of LiXX cells 3 - 5
Speed per volt [ot./min/V] 800
Max. power (30s/5S LiPo) [W] 660
No load current (3S) [A] 2.2
Max. peak current (30 s) [A] 48
Diameter [mm] 35
Length [mm] 48
Shaft diameter [mm] 4
Weight [g] 170
Number of poles 14
Time [°] 15 - 25
Rules [A] 50 - 60
Glider up to weight [g] 2700
Trainer up to weight [g] 2600
Aerobatic model up to weight [g] 2300
3D model up to weight [g] 1500
tr>
Recommended propeller 3S: 14-7”
4S: 13x6-8”
5S: 12x6 inches