Brushless electric motor with external rotor bell (outrunner) for airplane models: glider 950g, trainer 900g, acro 800g, 3D 700g, KV1400 revolutions/minute per volt, power supply Lixx 2-4s, shaft 4.0mm.
The KAVAN C motors are powerful 14-pole brushless electric motors with an external rotor bell ("Outrunner"). They have excellent electrical properties, elaborate construction and perfect production processing. They are a very good choice as drives for your recreational and sports models with excellent performance and affordable price. These are low-rpm, high-torque engines that spin large-diameter propellers without a gearbox.

Engine designation system: CxxYY-zzzz
C - Brushless motor with outrunner bell ("Outrunner")
xx - diameter of the motor in mm
YY - length of the motor in mm
zzzz - speed/volt (RPM/V), "KV"

KAVAN C3530-1400 is a brushless motor for smaller models with a flying weight of up to 950 g, powered by a 2 or 4 cell Li-Po battery. This engine is suitable for models of the size Easy Glider and similar. - rather for faster models where a propeller with a small diameter and with a higher speed fits.

Motor mounting: KAVAN C3530-1400 is designed for mounting on both sides. When installing the front behind the motor bulkhead, use at least two (opposite) screws or better four M3 screws, which are located on the motor bulkhead at a distance of 4-5 mm. The holes for the fastening screws on the front panel are distributed in 180 degrees at equal distances to the circular line with a diameter of 25 and 19 mm. The motor bulkhead should be 3-4mm plywood. We supply the stern mounting set (mounting cross and propeller driver) together with the engine.

The motor set includes: the motor C3530-1400 with cables and 3.5 mm gold-plated jack plugs, the set for the rear assembly, instructions.

Power supply LiXX cells: 2 - 4 ; Revolutions per volt [rpm/volt]: 1400 ; Max. Power (30s/4S LiPo) [W]: 390 ; No-load current (2S) [A]: 1.7 ; Max. peak current (30 s) [A]: 35 ; Diameter [mm]: 35 ; Length [mm]: 30 ; Shaft diameter [mm]: 4 ;

Power supply of LiXX cells 2 - 4
Speed per volt [ot./min/V] 1400
Max. power (30s/4S LiPo) [W] 390
No load current (2S) [A] 1.7
Max. peak current (30 s) [A] 35
Diameter [mm] 35
Length [mm] 30
Shaft diameter [mm] 4
Weight [g] 80
Number of poles 14
Time [°] 15 - 25
Rules [A] 40 - 45
Glider up to weight [g] 950
Trainer up to weight [g] 900
Aerobatic model up to weight [g] 800
3D model up to weight [g] 700
Recommended propeller 3S: 10x5”
4S: 8x4”