KAVAN Brushless Motor C2830-1300

Product no.: KAV30.0224

can be shipped within 3-14 days


Price incl. VAT, plus Shipping

Brushless electric motor with external rotor bell (outrunner) for airplane models: glider 800g, trainer 700g, acro 600g, KV1300 revolutions/minute per volt, power supply Lixx 2-3s, shaft 3.175mm.
The KAVAN C motors are high-performance 14-pole brushless electric motors with an external rotor bell (“Outrunner”) with excellent electrical properties and a precisely finished construction. The hardened steel shafts and high-quality bearings guarantee a very long service life. The quality material used for the manufacture of the stator and rotor also guarantees excellent performance parameters and great efficiency. These are low-rpm, high-torque engines that spin large-diameter propellers without a gearbox.

Engine designation system: CxxYY-zzzz
C - Brushless motor with outrunner bell ("Outrunner")
xx - diameter of the motor in mm
YY - length of the motor in mm
zzzz - speed/volt (RPM/V), "KV"

KAVAN C2830-1300 is a small brushless motor for small models with a flying weight of up to 800 g, powered by a 2 or 3-cell Li-Po battery. This motor is perfect for Park-Flyer Dumas and SIG/HERR models with a wingspan of 1000-1200mm, it is more suitable for faster models where the propeller with a smaller diameter and higher RPM looks more realistic.

Motor mounting: KAVAN C2830-1300 is designed for mounting on both sides. When installing the front behind the motor bulkhead, use at least two (opposite) screws or better four M3 screws, which are located on the motor bulkhead at a distance of 3-4 mm. The holes for the fastening screws on the front panel are distributed in 180 degrees at equal distances to the circular line with a diameter of 16 and 19 mm. The motor bulkhead should be 2-3mm plywood. We supply the stern mounting set (mounting cross and propeller driver) together with the engine.

The motor set includes: the C2830-1300 motor with cables and 3.5 mm gold-plated jack plugs, the set for rear mounting, instructions.


Power supply LiXX cells: 2 - 3 ; Revolutions per volt [rpm/volt]: 1300 ; Max. Power (30s/3S LiPo) [W]: 210 ; No-load current (2S) [mA]: 700 ; Max. peak current (30 s) [A]: 25 ; Diameter [mm]: 27.8 ; Length [mm]: 31 ; Shaft diameter [mm]: 3

Power supply of LiXX cells 2 - 3
Speed per volt [ot./min/V] 1300
Max. power (30s/3S LiPo) [W] 210
No load current (2S) [mA] 700
Max. peak current (30 s) [A] 25
Diameter [mm] 27.8
Length [mm] 31
Shaft diameter [mm] 3,175
Weight [g] 60
Number of poles 14
Time [°] 15 - 25
Rules [A] 25 - 30
Gliders up to weight [g] 800
Trainer up to weight [g] 700
Aerobatic model up to weight [g] 600
Recommended propeller 2S: 9x5-6”
3S: 8x5-6”

Browse this category: KavanMotoren