KAVAN Brushless Motor C2830-750

Product no.: KAV30.0216

can be shipped within 3-14 days


Price incl. VAT, plus Shipping

Brushless electric motor with external rotor bell (outrunner) for airplane models: glider 700g, trainer 600g, acro 500g, 3D 400g, KV750 revolutions/minute per volt, power supply Lixx 2-3s, shaft 3.175mm.
The KAVAN C motors are powerful 14-pole brushless electric motors with an external rotor bell ("Outrunner"). They have excellent electrical properties, elaborate construction and perfect production processing. They are a very good choice as drives for your recreational and sports models with excellent performance and affordable price. These are low-rpm, high-torque engines that spin large-diameter propellers without a gearbox.

Engine designation system: CxxYY-zzzz
C - Brushless motor with outrunner bell ("Outrunner")
xx - diameter of the motor in mm
YY - length of the motor in mm
zzzz - speed/volt (RPM/V), "KV"

KAVAN C2830-750 is a small brushless motor for small models with a flying weight of up to 700 g, powered by a 2 or 3 cell Li-Po battery. This motor is perfect for Park-Flyer Dumas and SIG/HERR models with a span of 1000-1200 mm. It is more suitable for motor gliders, 3D models and slower motor models that fit a larger diameter, lower RPM propeller.

Motor mounting: KAVAN G3 C2830-750 is designed for mounting on both sides. When installing the front behind the motor bulkhead, use at least two (opposite) screws or better four M3 screws, which are located on the motor bulkhead at a distance of 3-4 mm. The holes for the fastening screws on the front panel are distributed in 180 degrees at equal distances to the circular line with a diameter of 16 and 19 mm. The motor bulkhead should be 2-3mm plywood. We supply the stern mounting set (mounting cross and propeller driver) together with the engine.

The motor set includes: the C2830-750 motor with cables and 3.5 mm gold-plated jack plugs, the set for rear mounting, instructions.


Power supply LiXX cells: 2 - 3 ; Revolutions per volt [rpm/volt]: 750 ; Max. power (30 s/3S LiPo) [W]: 125 ; No-load current (2S) [mA]: 300 ; Max. peak current (30 s) [A]: 15 ; Diameter [mm]: 27.8 ; Length [mm]: 31 ; Shaft diameter [mm]: 3.

Power supply of LiXX cells 2 - 3
Speed per volt [ot./min/V] 750
Max. power (30s/3S LiPo) [W] 125
No load current (2S) [mA] 300
Max. peak current (30 s) [A] 15
Diameter [mm] 27.8
Length [mm] 31
Shaft diameter [mm] 3,175
Weight [g] 60
Number of poles 14
Time [°] 15 - 25
Rules [A] 18 - 25
Gliders up to weight [g] 700
Trainer up to weight [g] 600
Aerobatic model up to weight [g] 500
3D model up to weight [g] 400
Recommended propeller 2S: 12x5”
3S: 11x5”

Browse this category: KavanMotoren