Brushless electric motor with external rotor bell (outrunner) for airplane models: glider 450g, trainer 450g, acro 400g, 3D 300g, KV1400 revolutions/minute per volt, power supply Lixx 2-3s, shaft 3.175mm.
The KAVAN C motors are powerful 14-pole brushless electric motors with an external rotor bell ("Outrunner"). They have excellent electrical properties, elaborate construction and perfect production processing. They are a very good choice as drives for your recreational and sports models with excellent performance and affordable price. These are low-rpm, high-torque engines that spin large-diameter propellers without a gearbox.

Engine designation system: CxxYY-zzzz
C - Brushless motor with outrunner bell ("Outrunner")
xx - diameter of the motor in mm
YY - length of the motor in mm
zzzz - speed/volt (RPM/V), "KV"

KAVAN C2826-1400

KAVAN C2826-1400 is a miniature brushless motor for small models with a flying weight of up to 350 g, powered by a 2 or 3 cell Li-Po battery. With its help, you can successfully "electrify" e.g. he is also excellent for RC-Park-Flyer Dumas.

The Motor Mount: C2826-1400 is designed for mounting on both sides. When installing the front behind the motor bulkhead, use at least two (opposite) screws or better four M3 screws, which are located on the motor bulkhead at a distance of 3-4 mm. The holes for the fastening screws on the front panel are distributed in 180 degrees at equal distances to the circular line with a diameter of 16 and 19 mm. The motor bulkhead should be 2mm plywood. We supply the stern mounting set (mounting cross and propeller driver) together with the engine.

The motor set includes: the C2826-1400 motor with cables and 3.5 mm gold-plated jack plugs, the set for rear mounting, instructions.

Power supply LiXX cells: 2 - 3 ; Revolutions per volt [rpm/volt]: 1400 ; Max. power (30 s/3S LiPo) [W]: 120 ; No-load current (2S) [mA]: 500 ; Max. peak current (30 s) [A]: 14 ; Diameter [mm]: 27.8 ; Length [mm]: 27 ; Shaft diameter [mm]: 3

Power supply of LiXX cells 2 - 3
Speed per volt [ot./min/V] 1400
Max. power (30s/3S LiPo) [W] 120
No-load current (2S) [mA] 500
Max. peak current (30 s) [A] 14
Diameter [mm] 27.8
Length [mm] 27
Shaft diameter [mm] 3,175
Weight [g] 50
Number of poles 14
Time [°] 15 - 25
Rules [A] 18 - 20
Glider up to weight [g] 450
Trainer up to weight [g] 450
Aerobatic model up to weight [g] 400
3D model up to weight [g] 300
Recommended propeller 2S: 8x5-6”
3S: 7x4-5”